QSC announce CP series speakers – More boom for the buck!
Those Americans have been hard at work designing the new QSC CP series speakers….It’s a widely known fact that I’m a ‘Value for Money’ guy. I’ll be the one in the supermarket examining labels closely, to make sure the price per kilo is the best, regardless of its size – I know its sad but as Mike Skinner of The Streets once said “A Grand don’t come for free”. I apply this same mentality when shopping for audio gear, especially speakers. QSC’s K series have ruled the active PA speaker roost for some time – especially with their new KS212C AND KS112 sub-woofers. QSC K-series speakers are used the world over, from band gigs, weddings, houses of worship, public address and royal/political announcements. So you’re probably wondering why they have brought out a new range. The answer is simple. The K.2 series is awesome with many features on-board, but this will always be a certain price. This is where the QSC CP series speakers range sweeps in and sets off my VFM* buzzer. They don’t have many bells and whistles but they have got the core of what many are looking for in an active speaker: Reliability, Portability, Quality and Price.
What does CP Series mean?
QSC have labelled these CP, which stand for compact powered. As you’ll see in our comparison tables below, they are certainly smaller and lighter than the K series, so the name is fair! They make QSC speaker ownership far more accessible, whilst still keeping the styling and aesthetics so they would also be handy to have for bigger gigs or for monitors where you want to keep a single brand. The QSC CP series speakers come with a 3 year warranty, based on a free registration once you purchase the speakers.
Why are the QSC CP Series speakers worth buying?
First impressions of the CP series is certainly their compact design. Overall, the speakers are smaller than the K series used the world over. QSC’s speaker building formula is still in full effect with the QSC CP series speakers – their fully polypropylene cabinets and full steel grille wraps around the front, whilst there are moulded extrusions on certain corners and bumpers to protect the amplifier plate at the rear. The CP series houses 2 Class D amplifier modules a 200w and 800w, matched perfectly to their respective HF and LF transducers. The CP series also features an advanced DSP contour adjust system, allowing you to change the sonic characteristics depending on application. All of this comes in light, at only 9.5kg for the CP8 and 13.7kg for the CP12.
Whats on the back of the QSC CP series speakers?
CP series speakers contour select
I’m easily excited; especially under the light of my VFM* siren. One of the main reasons for this is the contour select on these puppies. Once you’ve rocked up to a gig with these CP series speakers, heres what you can select from:
- Default – This is the ‘How QSC intended’ setup an the natural voicing of the speaker. You can apply this setting in any environment from live band/performance, playback or connecting instruments
- Default Ext Sub – as above but with an 80Hz high-pass filter when you are using the speakers alongside a dedicated sub woofer such as KS112 and K-sub for example
- Dance – The Voicing in the dance setting is more of a ‘Smiley face’ EQ curve. Enhanced bass for some added thump, and some added clarity on the top end making it an ideal setting when using a pair on pop/dance music
- Dance Ext Sub – (you probably know whats coming!) Same as the ‘Dance’ setting but with an 80Hz High-pass filter to use the CP series speakers along side an external sub woofer like the KS212C/KS112.
- Floor Monitor – The CP series speakers can be used on the floor, and the floor monitor setting gears to be more robust against feedback with microphones within close proximity.
- Speech – When connecting a microphone to input B, this setting gears for vocal clarity, whether using handheld dynamic mic such as PGA58 or a headset like the BLX-SM31 kit
Different positions for the QSC CP series speakers and accessories.
Both the CP8 and CP12 can be used in three different positions for further flexibility (that VFM* buzzer is still going, but not getting tiring!) First of these is the traditional pole mount. Chuck it on a speaker stand, add power via IEC and then signal, you’re ready to rock. Secondly the CP series can be used as a wedge; the mouldings on the side and back allow for the speakers to sit on the floor safely whilst minimising the chance of scratching or marking the cabinet. The third way is via the horizontal yoke mount – designed for permanent installations at entertainment levels – leading me onto my next point: Accessories! The CP series speakers are lightweight to carry, with transportation aided even further with the QSC official CP tote bags. They are a heavy duty nylon mix, with ample internal padding to prevent the speaker of knocks and bumps. You can still carry the CP series Utility of these speakers are even further increased with thanks to the outdoor covers, made of a lightweight weather resistant material. These can be used for short term speaker setups against the elements where the front cover unzips to reveal a mesh layer to obtain sound quality and throw. The rear panel is removable and allows access to cables and controls.
QSC CP8 vs K8.2 comparison chart
Feature | QSC CP8 | QSC K8.2 |
Configuration | 2-way Active | 2-way Active. |
Frequency Response (-6dB) | 56-20kHz | 59-20kHz |
Coverage Angle | 90 Degrees Axisymetric | 105 Degrees Axisymetric |
Amplifier | 1000w Class D | 2000w Class D |
Connections | 2 x locking XLR/F ¼” combo (Line & Mic/Line input) 1 x 3.5 mm TRS (Stereo Input) 1 x XLR/M (Mix Output) 1 x IEC power connector |
2 x locking XLR/F ¼⁻ᶦⁿᶜʰ combo (Mic/Line Input & Hi-Z/Line Input) 1 x 3.5 mm TRS (Stereo Input) 2 x XLR/M (Loop-thru Output) 1 x XLR/M (Mix Output) 1 x locking IEC power connector |
Controls | Power 2 x Gain Mic Boost Push Switch 6-way Contour Selection Switch |
Power 3 x Level Rotary encoder (push) 2 x selection buttons |
Indicators | Power LED 2 x Input Signal LED Input B MIC selected LED Limiter active LED |
Monochrome LCD Display (45 mm x 25.4 mm) 2 x Power LED (front and rear) 3 x Input Signal LED Input A Mic selected LED Input B Hi-Z selected LED Limiter active LED |
Enclosure Material | Polypropylene | Impact Resistant ABS |
Maximum SPL @ 1m | 124dB | 128dB |
Dimensions (mm) (HxWxD) | 411 x 273 x 256 | 449 x 280 x 269 |
Weight | 9.5kg | 12.2kg |
QSC CP12 vs K12.2 comparison chart
Feature | QSC CP12 | QSC K12.2 |
Configuration | 2-way Active | 2-way Active. |
Frequency Response (-6dB) | 49-20kHz | 50-20kHz |
Coverage Angle | 75 Degrees Axisymetric | 75 Degrees Axisymetric |
Amplifier | 1000w Class D | 2000w Class D |
Connections | 2 x locking XLR/F ¼” combo (Line & Mic/Line input) 1 x 3.5 mm TRS (Stereo Input) 1 x XLR/M (Mix Output) 1 x IEC power connector |
2 x locking XLR/F ¼⁻ᶦⁿᶜʰ combo (Mic/Line Input & Hi-Z/Line Input) 1 x 3.5 mm TRS (Stereo Input) 2 x XLR/M (Loop-thru Output) 1 x XLR/M (Mix Output) 1 x locking IEC power connector |
Controls | Power 2 x Gain Mic Boost Push Switch 6-way Contour Selection Switch |
Power 3 x Level Rotary encoder (push) 2 x selection buttons |
Indicators | Power LED 2 x Input Signal LED Input B MIC selected LED Limiter active LED |
Monochrome LCD Display (45 mm x 25.4 mm) 2 x Power LED (front and rear) 3 x Input Signal LED Input A Mic selected LED Input B Hi-Z selected LED Limiter active LED |
Enclosure Material | Polypropylene | Impact Resistant ABS |
Maximum SPL @ 1m | 126dB | 132dB |
Dimensions (mm) (HxWxD) | 516 x 350 x 323 | 602 x 356 x 350 |
Weight | 13.7kg | 17.7kg |
The QSC CP8 is priced at £396 inc vat and the CP12 at £510 inc vat. You can pre-order them right here.
*VFM: Value For Money – Marcus’ term for items that perform extremely well at their price point 🙂